Biosafety Cabinet

Specifications 

Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection.

Types 

There are three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Below is short description about all types:

• Type A2: recirculate approximately 70% air and 30% exhaust
• Type B1: recirculate approximately 30% air and 70% exhaust
• Type B2: Does not recirculate but exhaust 100% air 

Construction 

These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today. There are three different MOC used.

• Complete Stainless Steel 304 / 316
• Inner Stainless Steel, Outer Mild Steel
• Stainless Steel bench, rest mild Steel

Air Circulation 

In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.97% efficiency HEPA filters for particle size 0.3 microns in our biological class 2 type A2 safety cabinets. These air filters are of reputed brands in the market, economical in price and easy replaceable. ISO 5 / Class 100 quality, supply and exhaust through HEPA filters are done. Inflow velocity remains approx. 105 fpm (0.5 m/sec), while down flow velocity remains approx. 55 fpm (0.3 m/sec). 70 % air is re-circulated and 30% exhaust.

Standard Accessories 

Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UV lamps are fitted inside working zone in such a way that the operator cannot see them directly. An hour meter is connected to UV lamp. Electrical sockets are fitted to run any instrument under the working area; in addition, service fixtures for air, gas, vacuum and water are fitted on demand

We also manufacturer biosafety cabinets class 2 type B1 and B2

Optional

• Microprocessor based controller system
• Digital display of real time inflow / down flow air velocities
• Alarm for variation in air flow and blocked blower
• Sash height alarm o UV hour meter
• Virus burnout
• Service valves (gas, vacuum, air & water)
• Electrical sockets 
• Differential pressure sensor 
• Arm / elbow rest 
• Drain pan on work bench 
• Movable stand (wheels)
• Foot rest
• Calibration certificates
• HMI Controller

Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection.

Types

We offer three types of class 2 biosafety cabinets are made. It is the type of work which

decides which class 2 BSC should be used in laboratory. Below is short description about all

types we offer:

• Type A2: recirculate approximately 70% air and 30% exhaust
• Type B1: recirculate approximately 30% air and 70% exhaust
• Type B2: Does not recirculate but exhaust 100% air

Construction

Our cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today. There are three different MOC used. Complete Stainless Steel 304 / 316 Inner Stainless Steel, Outer Mild Steel Stainless Steel bench, rest mild Steel

Air Circulation of Class II B2

In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.95% efficiency HEPA filters for particle size 0.3 microns in our biological class 2 type B2 safety cabinets. These air filters are of ISO 5 / Class 100 quality. Inflow velocity remains approx. 105 fpm (0.5 m/sec) with 100% air exhaust through separate exhaust mechanism.

Standard Accessories

Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UV lamps are fitted inside working zone in such a way that the operator cannot see them directly. Microprocessor controlled mechanism allows UV on only when door is closed. Auto sensors facilitate to run blower after opening of door only. User can set warm time as per convenience which in turn will tun on the FL light only after set time and door open controlled by microprocessor. Electrical sockets are fitted to run any instrument under the working area; in addition, service fixtures for air, gas, vacuum and water are fitted on demand We also manufacturer biosafety cabinets class 2 type A2

Microprocessor based PID Controller

• Automatic control of UV, Blower and LED light on sash movement.
• Large LCD Display with clear vision.
• External Socket control to avoid hand touch inside the chamber
• Warm up timer option allows delay in switching on LED to clear internal air before working on opening of Sash to safe level.

Switches and indicators 

Microprocessor controlled switches for UV, Blower Motor, LED/FL Lamp with inbuilt pressure gauge and UV timer

Standard Fittings

• UV germicidal lamp to cover the entire work surface.
• Mounted on a stand with levelling feet
• Inbuilt pressure gauge
• Fluorescent lamp /LED Lamp

Standard functions

• Digital display on pressure on HEPA.
• Sash Height Alarm on display
• Movable stand
• Virus Burnout unit
• Service valves for gas and water
• Arm Elbow rest

Optional

• Digital display of real time inflow / down flow air velocities
• Drain pan on work bench
• Movable stand (wheels)
• Foot rest
• Calibration certificates
• HMI Controller