Latest Products https://www.igenelabserve.in Latest Products Fri, 03 Dec 2021 09:39:58 +0530 en-us https://www.igenelabserve.in Analytical Weighing Balance https://www.igenelabserve.in/analytical-weighing-balance.htm https://www.igenelabserve.in/analytical-weighing-balance.htm Mon, 31 May 2021 00:00:00 +0530 Standard Features: High contrast, Large Backlit LCD Display for easy viewing with (Advance Eye protection) Based on EMFC Brilliant MONOLOG single block technology Strong anti-shaking software for accurate result in normal vibration surface Standard RS 232 C interface USB port, easy to connect with PC / Printer Single touch key Fully Auto External / internal calibration Overload protection design. Mass unit conversion by toggling Conforms GLP / GMP and ISO 9001Standard. 20 standard global weighing units User selectable stability and filter level. Easy operating system. Below weighing system provided. Auto Density determination facility GSM weighing facility High grade chemical resistance body Biosafety Cabinet Class II A2 https://www.igenelabserve.in/biosafety-cabinet-class-ii-a2.htm https://www.igenelabserve.in/biosafety-cabinet-class-ii-a2.htm Sat, 29 May 2021 00:00:00 +0530 Specifications  Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection.   Types  There are three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Below is short description about all types: Type A2: recirculate approximately 70% air and 30% exhaust Type B1: recirculate approximately 30% air and 70% exhaust Type B2: Does not recirculate but exhaust 100% air    Construction  These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today. There are three different MOC used. Complete Stainless Steel 304 / 316 Inner Stainless Steel, Outer Mild Steel Stainless Steel bench, rest mild Steel   Air Circulation  In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.97% efficiency HEPA filters for particle size 0.3 microns in our biological class 2 type A2 safety cabinets. These air filters are of reputed brands in the market, economical in price and easy replaceable. ISO 5 / Class 100 quality, supply and exhaust through HEPA filters are done. Inflow velocity remains approx. 105 fpm (0.5 m/sec), while down flow velocity remains approx. 55 fpm (0.3 m/sec). 70 % air is re-circulated and 30% exhaust.   Standard Accessories  Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UV lamps are fitted inside working zone in such a way that the operator cannot see them directly. An hour meter is connected to UV lamp. Electrical sockets are fitted to run any instrument under the working area; in addition, service fixtures for air, gas, vacuum and water are fitted on demand   We also manufacturer biosafety cabinets class 2 type B1 and B2   Optional Microprocessor based controller system Digital display of real time inflow / down flow air velocities Alarm for variation in air flow and blocked blower Sash height alarm o UV hour meter Virus burnout Service valves (gas, vacuum, air & water) Electrical sockets  Differential pressure sensor  Arm / elbow rest  Drain pan on work bench  Movable stand (wheels) Foot rest Calibration certificates HMI Controller Biosafety Cabinet Class II B2 https://www.igenelabserve.in/biosafety-cabinet-class-ii-b2.htm https://www.igenelabserve.in/biosafety-cabinet-class-ii-b2.htm Sat, 29 May 2021 00:00:00 +0530 Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection.   Types We offer three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Below is short description about all types we offer: Type A2: recirculate approximately 70% air and 30% exhaust Type B1: recirculate approximately 30% air and 70% exhaust Type B2: Does not recirculate but exhaust 100% air   Construction Our cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today. There are three different MOC used. Complete Stainless Steel 304 / 316 Inner Stainless Steel, Outer Mild Steel Stainless Steel bench, rest mild Steel   Air Circulation of Class II B2 In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.95% efficiency HEPA filters for particle size 0.3 microns in our biological class 2 type B2 safety cabinets. These air filters are of ISO 5 / Class 100 quality. Inflow velocity remains approx. 105 fpm (0.5 m/sec) with 100% air exhaust through separate exhaust mechanism.   Standard Accessories Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UV lamps are fitted inside working zone in such a way that the operator cannot see them directly. Microprocessor controlled mechanism allows UV on only when door is closed. Auto sensors facilitate to run blower after opening of door only. User can set warm time as per convenience which in turn will tun on the FL light only after set time and door open controlled by microprocessor. Electrical sockets are fitted to run any instrument under the working area; in addition, service fixtures for air, gas, vacuum and water are fitted on demand We also manufacturer biosafety cabinets class 2 type A2   Microprocessor based PID Controller Automatic control of UV, Blower and LED light on sash movement. Large LCD Display with clear vision. External Socket control to avoid hand touch inside the chamber Warm up timer option allows delay in switching on LED to clear internal air before working on opening of Sash to safe level.   Switches and indicators  Microprocessor controlled switches for UV, Blower Motor, LED/FL Lamp with inbuilt pressure gauge and UV timer   Standard Fittings UV germicidal lamp to cover the entire work surface. Mounted on a stand with levelling feet Inbuilt pressure gauge Fluorescent lamp /LED Lamp   Standard functions Digital display on pressure on HEPA. Sash Height Alarm on display Movable stand Virus Burnout unit Service valves for gas and water Arm Elbow rest   Optional Digital display of real time inflow / down flow air velocities Drain pan on work bench Movable stand (wheels) Foot rest Calibration certificates HMI Controller High Speed Cooling Centrifuge https://www.igenelabserve.in/high-speed-cooling-centrifuge.htm https://www.igenelabserve.in/high-speed-cooling-centrifuge.htm Tue, 08 Jun 2021 00:00:00 +0530 Features Brushless motor with simple construction, more reliable performance, longer life and noise less run. Microprocessor control, digital indicator for speed, temperature and time, running parameters can be edited and changed to RCF. Heavy duty C.R.C. construction finished with powder coating Stainless Steel centrifugal bowl for extra protection and easy cleaning. Fitted with well-balanced brushless motor with electronic drive. Digital timer 0-99 minutes. 4 lines 20 characters LCD display for set time, run time, set & run rpm, rcf and rotor identification. 50 programmes can be stored in memory and automatic rotor identification on display. Additional electronic lid lock who does not allow opening lid when machine is running and opens automatically after centrifuge time is over. Dynamic brake (automatic) and imbalance detector are provided. Fast spin option. Selection of 3 acceleration + 4 deceleration profile. Programmable Speed Regulator from 2000 to 20000 in interval of 100 rpm Last test parameter recall and displays automatically on LCD Supply with instruction manual, cord & plug to work on 220 volts 50Hz A.C. Laboratory Bod Incubator https://www.igenelabserve.in/laboratory-bod-incubator.htm https://www.igenelabserve.in/laboratory-bod-incubator.htm Fri, 04 Jun 2021 00:00:00 +0530 Standard Features: BOD Incubator is used for storage and fugal / bacterial culture growth at 37°C or below. These laboratory incubators are also known as cooling incubators or BOD Incubator because their temperature range remains between (ambient-20°C) to 60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber. Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly. iGene Lab serve BOD incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient. Refrigerant used in this system is free of CFC. In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc. Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.   Optional GMP construction (Inner & outer SS 304)  PLC + HMI controller w/ USB interface  21 CFR Part 11 software  Data logger w/ USB interface  Thermal printer  Inner chamber LED light Laboratory Deep Freezer https://www.igenelabserve.in/laboratory-deep-freezer.htm https://www.igenelabserve.in/laboratory-deep-freezer.htm Fri, 04 Jun 2021 00:00:00 +0530 iGene Labserve deep freezer combine microprocessor controlled temperature with a state-of-the-art design that delivers a true fan-circulated convection .Our Deep Freezer are designed for convenient and safe use in many applications such as Animal & Plant Cell Culture, Constant Temperature, Germination Test.   Features: Advanced, Adaptive, Microprocessor Control resulting in Superior Temperature Accuracy High-Quality LED Display with bright and clear visuals. High Quality Compressor with advanced technology and long life. CFC-free(134A) Refrigeration System Corrosion Resistant 304 Stainless Steel Chamber and Shelves 3 Stainless Steel Shelves are included Over Temperature Alarm Mechanism 1 Year Warranty   Optional GMP construction (Inner & outer SS304)  PLC + HMI controller w/ USB interface  21 CFR Part 11software  Data logger w/ USB interface  Thermal printer  Inner chamber LED light Ultra Low Temperature Freezer https://www.igenelabserve.in/ultra-low-temperature-freezer.htm https://www.igenelabserve.in/ultra-low-temperature-freezer.htm Thu, 20 May 2021 00:00:00 +0530 IG-ULF Series freezers provides an ideal freezing environment for advanced medical and industrial applications. These freezers offer unrivalled cold storage protection for valuable samples and materials and maintain internal temperature of -80°C. The refrigerators are equipped with auto defrosting device with highly efficient microprocessor for ease of operation with minimum space. These are widely used in scientific research labs for long term storage of critical samples, offering exceptional temperature uniformity with excellent sample protection.   Features High-tech construction combines panel insulation with environmental-friendly, water-blown foam insulation for maximum sample-to-vial footprint storage. Environmental-friendly, CFC/HCFC free refrigerants. Power management system protects against a wide range of voltage variation and is easily accessible through the touch-screen display. Microprocessor based control system.(HMI+PLC optional) Defrost cycle can be initiated to shut down the compressor and keep the cabinet defrost free. Ergonomic and easy to use. USB ports for PC connectivity in HMI PLC RS 232/485 connectivity can be provided if required CFC/HCFC-free refrigerants maximize cooling and minimize environmental impact Chart recorder for better temperature monitoring (optional) Corrosion resistant interior and exterior. Incident monitor provides visual and audible warnings of system abnormalities for increased sample protection. Digital display and direct settings for maintaining desired operations. Castors for ease of movement. Lockable hinged doors.   Applications Biotechnology Clinics / University Hospitals Pharmacy Industry Basic Research / Research Institutes Blood-Banking   Alram Systems Power failure or temperature deviation triggers audible and visual warning. Automatic Incident Monitor identifies temperature deviation beyond alarm set points. System includes adjustable safety alarm with automatic, continuous charge battery backup and digital battery indicator   Construction Details iGene Labserve Ultra Low Deep Freezer is double walled cooled units. Outer body of our laboratory refrigerators are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is made of stainless steel sheet-304. The 100 mm gap between the walls is filled high grade polyurethane insulation, which ensures maximum thermal efficiency.    Cooling  An energy efficient cooling unit is installed in our freezer. We use high end CFC free compressors, conforming to latest international standards and guidelines.   Cooling medium  Air cooled CFC free refrigerants.    Temperature Range  Temperature range is -40 Deg C to -80 Deg C controlled by nanotechnology based microprocessor temperature controller.    Temperature accuracy is +/- 1°C or better.   Optional GMP construction (Inner & outer SS304)  PLC + HMI controller w/ USB interface 21 CFR Part 11software Data logger w/ USB interface Thermal printer Inner chamber LED light DNA Electrophoresis https://www.igenelabserve.in/dna-electrophoresis.htm https://www.igenelabserve.in/dna-electrophoresis.htm Thu, 20 May 2021 00:00:00 +0530 IG-DN Series horizontal electrophoresis is having wide range of options to select from mini to maxi size with multiple comb options. DN series horizontal electrophoresis are single molded units and does not have any fabrication or pasting to avoid leakage. Uniquely designed caster assembly is very easy to operate and are leakage free.   Features High resolution separation with simple operation. Multiple lines of gel can be run at the same time. Black band on the gel tray make it convenient to load the samples and observe the gel. One gel casting device can cast different size of gel (Except Mini Unit). Power fails when you open the lid for user’s safety. Withdrawable electrode, convenient for maintenance. Special gel casting device for easy and fast gel casting operation. Save buffer solution. Maxi unit suitable for PCR (96 wells) and 8-channel Pipettor use. The zebra crossing on gel tray makes it's easy to add the sample and observe the gel. Anti-high temperature, in deformable. Exquisite, durable & long-life material of construction. Special comb design, one comb has two different teeth in Midi unit. Dry Bath Incubator https://www.igenelabserve.in/dry-bath-incubator.htm https://www.igenelabserve.in/dry-bath-incubator.htm Sat, 29 May 2021 00:00:00 +0530 Standard Features A wide range temperature control up to 120°C Timer function support Flexible adapter block selection Overheating protection Lid for protection and heat preservation Gel Documentation System https://www.igenelabserve.in/gel-documentation-system.htm https://www.igenelabserve.in/gel-documentation-system.htm Thu, 20 May 2021 00:00:00 +0530 IG-618GD Series Gel Documentation and Analysis System is designed for the detection and documentation of nucleic acids and proteins. It adopts a high resolution and high sensitive scientific CCD-Camera, which enables the instrument to capture utter weak signals under extremely low illumination condition. The automatic controls and the intuitive software we offered can help the researchers to get rid of the complicated operation process and increase the experimental efficiency.   Applicable Dyes DNA/RNA detection : EthiduimBromide,SYBR™ Gold,SYBR™ Green,SYBR™ Safe,Gel Star™,Texas Red,Fluorescein; Protein Detection : Coomassie Brilliant Blue, Silver Staining,Sypro™ Red,Sypro™ Orange,Pro-QDiamond,Deep Purple;   Functions High resolution scientific CCD Camera High sensitivity and low noise Ultrafast lens Numerical adjusting focal length and aperture Automatic control module UV protection   Features RIM Moulding Polymer The Environmental friendly reaction injection moulding technique has been used to designed door and front panel.   Upgradable options Easily upgradable system with any of this hardware module as per applications of researchers 1. UV Transmission 2. UV + Blue Light Transmission 3. UV+ Blue + White light transmission   Better User Experience Depending on application, only use Arabic numerals which are easily adjustable as per different application automatically instead of professional parameters of aperture and focus.   SMART Transilluminator Compared with traditional UV Transilluminator, the NON-Lamp design provides excellent uniformity of transmission with reduced background noise   Blue and White Light Transilluminator The magnetic thimble interface realizes free switches between the blue light and white light transmission. The touchable brightness adjustment switch facilitates the observation and recovery.   Software Gel Capture Precise and automatic exposure function Advanced pixel binning technology increases the sensitivity of the systems Automatic access of capture parameters Image rotation, cropping and counter colour options Convenient image navigation and browsing   Analysis Automatic recognition and numbering of Gel Bands. Calculation of molecular weight of each band. Option of saving the result in xls format. Calculation of optical density for quantitative analysis Optimization of visual effects by wiping background mode. Hot Air Oven https://www.igenelabserve.in/hot-air-oven.htm https://www.igenelabserve.in/hot-air-oven.htm Mon, 31 May 2021 00:00:00 +0530 We customize ovens in various temperature ranges, material of construction and chamber dimensions. Maximum operating temperature range of these ovens are 200°C, 250°C and 300°C, which is controlled through microprocessor based PID controller, which displays both set value (SV) and process value (PV) and plays important role in temperature control. Forced air circulation is maintained using branded motor driven blower system. For heating, we use ceramic bead heating elements or tubular air heaters for high temperature. Each unit is fitted with over temperature protection device (safety thermostat), which keeps your oven safe in case of controller failure. Our hot air oven are having attractive design, rugged construction and easy to clean surface; therefore, internal chamber of our ovens is made of thick gauge of stainless steel (SS 304 / SS 316). Corners are such designed that cleaning becomes an easy job for operator. Shelves are made of stainless steel wire mesh cable; these are removable in order to adjust the height level. Depending upon size of internal chamber quantity of shelves may vary from 2 to 7 or more. External cabinet is made of either powder coated mild steel, GI sheet or stainless steel as required. For easy mobility of large ovens, caster wheels with brake are fitted at the bottom. We offer several optional accessories to fit in your hot air oven; such as, explosion proof heater, digital timer, PLC based HMI controller, RS485 computer interface, 21 CFR software, data logger and circular chart recorder, HEPA filter air inlet etc. External cabinet Glass wool insulation Inner chamber Tubular air heaters Motor driven blower Temperature sensor Tray slots PID temperature controller Load indicator Mains on/off switch Safety thermostat   FEATURES & BENEFITS  50°C to 250°C temperature  Uniform air circulation across chamber Digital temperature controller cum indicator Excellent uniformity at high temperature  Stainless steel 304 grade inner chamber Corrosion resistant exterior Fume ventilation points on both sides Stainless steel cable trays  Over temperature protection.   Optional Up to 250°C and 300°C, Perforated inner walls Pass through (two side doors) Access ports for sensors & data monitoring Digital timer 99 hours 99 minutes, Fan speed controller Programmable controller for ram & soak Toughened glass window, Stainless steel exterior (GMP model) RS232 / RS485 interface, Data logger with USB interface HMI & PLC automation, Caster wheels with lock, U Shaped Nichrome Air Heater Cooling Incubator Shaker https://www.igenelabserve.in/cooling-incubator-shaker.htm https://www.igenelabserve.in/cooling-incubator-shaker.htm Thu, 20 May 2021 00:00:00 +0530 IG-ISC Series incubator shakers are available with options to select from multiple sizes. All models are having cooling and non-cooling variants. Our models are reliable, versatile and space saving and very affordable. The simplest and design and ease of operation make our incubator shaker highly efficient for microbial culturing.   Features Triple drive mechanism connected with the shaking tray for robust and balanced shaking to use for long duration. Easy cleaning with front drain in port to easily drain off accidental spills Easy to move with optional stand with wheels. Flexible platform to accommodate varieties of clamps and flasks, also available with sticky mat for universal use. Flexible screwing options to fix clamps and holders for test tubes at platform at desired positions. Small unit height is less than 2.5 feet allows it to use below the working bench for space saving in small labs.  Models available with cooling as standard, non-cooling eco versions are also available on demand. Suitable for microbial cultures. Viewing window with light switch to observe during operation Customize options available on demand. Laminar Air Flow Bench https://www.igenelabserve.in/laminar-air-flow-bench.htm https://www.igenelabserve.in/laminar-air-flow-bench.htm Sat, 29 May 2021 00:00:00 +0530 A laminar air flow workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flow velocity remains between 0.4 m/s to 0.6 m/s. The purpose of using such workstations in laboratory is to create particle and bacteria free working environment to carry out specialized work. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants   Types Vertical Laminar Air flow It is the most used type of laminar air flow. In vertical flow cabinet, room air is entered in working area through HEPA filter fitted on top of the cabinet. Thus, air flows downward (vertically) towards work surface and leaves the cabinet sweeping out particles and bacteria.   Horizontal Laminar Air Flow In horizontal air flow cabinet, room air is entered in working area through HEPA filter fitted on the back side of the cabinet. Filtered air flows horizontally towards the user creating sterile working environment.   Construction These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Laminar bench in the market today. There are 4 different MOC used.  Complete Stainless Steel 304 / 316  Inner Stainless Steel, Outer Mild Steel  Stainless Steel bench, rest mild Steel  Stainless Steel bench, wooden Body   Air Filtration The efficiency of a Laminar Air Flow workstation depends upon the quality of pre filters and HEPA filters. In our LAF, the Air filtration system is created to work efficiently even in critical environment. Pre filter that we use are box type pleated having efficiency 95% down to 5 micron and made of HDPE + Non-woven + HDPE mesh media and fitted in aluminium case. The HEPA filters are of high quality having efficiency 99.99 % down to 0.3 micron and fitted in aluminium anodized case. The blower assembly has ¼ HP; 1400 RPM branded motor and has aluminium anodized impellers. The working area is carefully designed for comfortable working and easy cleaning. The workbench is made of stainless steel. Standard fittings are air / gas cock and electrical outlet. For illumination, we use fluorescent lamps. Front side of working area is covered by manual sliding door (sash), which is made of transparent acrylic plastic. There are some optional features that can be added if required by customer. LCD display for air velocity, time and lamp on/off status are displayed on it. Germicidal UV lamp, extra electrical socket and Magnehelic gauge are also fitted if required.   Germicidal UV lamp UV lamp is an added option which is used to sterilize working area prior use. It is advised nocontact to made in chamber during this time. We are ISO and CE certified laminar air flow manufacturers and suppliers in India. Our company designs both types of horizontal and vertical laminar flow benches for laboratory uses that meet ISO (class 100) standards. These units are ruggedly constructed for years of worry free operation and made with stainless steel sheet (304 / 316) or powder coated mild steel or GI sheets.   Optional Motorized sliding door LCD display for velocity, time & lamp on/off UV Germicidal lamp UV Hour meter Magnehelic gauge Extra power outlet switch Foot rest Levelling legs for stand DOP HEPA filter testing Mini Centrifuge https://www.igenelabserve.in/mini-centrifuge.htm https://www.igenelabserve.in/mini-centrifuge.htm Wed, 09 Jun 2021 00:00:00 +0530 Standard Features: Ideal for microfiltration and quick spin-downs Easy-to-use with dual start/stop function 7200rpm fixed speed Compatible with 2mL × 8 and PCR8 × 2 rotors Quiet running, noise level ≤ 45 Db Rotor change without tools Accelerates and brakes in seconds PCR Plate Centrifuge https://www.igenelabserve.in/pcr-plate-centrifuge.htm https://www.igenelabserve.in/pcr-plate-centrifuge.htm Thu, 20 May 2021 00:00:00 +0530 Features Centrifuge for Micro plates is designed for quick spins of samples in PCR plates. Primarily designed for use with 96 or 384 well plates and small volumes, it accepts skirted, non-skirted and semi-skirted styles. Easy to use, real-time display of all operating information. Countdown mode support. DC brushless motor, low noise, small interference, maintenance-free. Opening the cap will automatically stop running. Fast acceleration from standstill to maximum speed fully in just 10sec. Braking time is short, from the highest speed to a complete standstill in just 4sec. PCR Thermal Cycler https://www.igenelabserve.in/pcr-thermal-cycler.htm https://www.igenelabserve.in/pcr-thermal-cycler.htm Sat, 29 May 2021 00:00:00 +0530 Features New and unique appearance, the interface operation is simple and convenient, compact size. The latest generation of semiconductor technology with excellent temperature uniformity. Excellent temperature rising and cooling rate up to 4℃ / s. Single mould aluminium case provides higher heat dissipation performance. 5-inch TFT high-definition full-touch colour screen, can quickly edit the required files, visual display of temperature curve, convenient and fast setting, accurate display of temperature curve and instrument running process status in real time. The system has a built-in gradient calculator, which can easily obtain accurate annealing temperature for different experimental samples to optimize PCR reaction conditions. User login, rights management, password protection, data security, administrators can clear users, large data storage; the maximum number of files that can be stored in the machine is greater than 100. Unique heating lid design for adjustable height of tubes Real-time display of gradient temperature distribution, real-time temperature display, more conducive to controlling the sample temperature. The hot lid temperature and working mode can be set, hot lid can be switched on and off and tube temperature control mode and module temperature control mode can be chosen to meet more different experimental requirements. PCR Workstation https://www.igenelabserve.in/pcr-workstation.htm https://www.igenelabserve.in/pcr-workstation.htm Tue, 08 Jun 2021 00:00:00 +0530 Plant Growth Chamber https://www.igenelabserve.in/plant-growth-chamber.htm https://www.igenelabserve.in/plant-growth-chamber.htm Thu, 20 May 2021 00:00:00 +0530 Plant Growth Chamber is a chamber having three side illumination, humidity & temperature. It has applications in plant science, soil science & agriculture research etc. The use of plant growth chamber is to create artificial environment using combination of temperature, humidity and light at different set points for biological samples, electronic components and other relevant applications.   Construction : We construct the inner chamber of machine with thick gauge of stainless steel 304 & exterior with powder coated GI sheet for corrosion resistance surface. High density PUF insulation of 70mm is filled between inner and external walls. Main chamber is fabricated with arc welding. We construct sizes as small as 100 litres to 1200 litres or customize as per user requirement. Caster wheels with brake are fitted for easy movement.   Doors : We use double door mechanism with inner door for observation which is fixed directly to the inner chamber that give you access to view plants inside without any variation in internal atmosphere. The exterior door is insulated and fixed with easy to use latches.   Temperature & Humidity: The temperature range is 5°C to 60°C and humidity range is 50% to 90%. These parameters are controlled through PID controller with excellent accuracy and uniformity through PT100 temperature and capacitive humidity sensors. High Quality heaters are used for temperature. For humidity, stainless steel tank with immersion heater is used with automatic water filling facility.   Illumination : Illumination plays important role in effective plant growth condition; therefore, we use high quality growth lights at three sides of the chamber. These lights are controlled through cyclic timer for 24X7 a week. These lights can be easily changed or replaced at user level.   Optional : We also equip our plant growth chambers with some advance features such as PLC based HMI controller. It features color touch screen having display and control of temperature and humidity with data monitoring and storage and also facility USB interface to transfer data into pen drive. 30mm port hole for external wires and validation are also available.   Features & Advantages Accuracy of temperature, humidity & light Made according to plant height Digital control panel Digital light timer Height adjustable shelves Durable construction   Optional Exterior made of stainless steel 304 / 316 White painted steel inner walls Door open alarm Plant growth racks UV lamp PLC with HMI interface Data logger with USB interface Password protection for controller Caster wheels Stability Chamber https://www.igenelabserve.in/stability-chamber.htm https://www.igenelabserve.in/stability-chamber.htm Mon, 31 May 2021 00:00:00 +0530 Plant Growth Chamber is a chamber having three side illumination, humidity & temperature. It has applications in plant science, soil science & agriculture research etc. The use of plant growth chamber is to create artificial environment using combination of temperature, humidity and light at different set points for biological samples, electronic components and other relevant applications.   Description Construction : We construct the inner chamber of machine with thick gauge of stainless steel 304 & exterior with powder coated GI sheet for corrosion resistance surface. High density PUF insulation of 70mm is filled between inner and external walls. Main chamber is fabricated with arc welding. We construct sizes as small as 100 litres to 1200 litres or customize as per user requirement. Caster wheels with brake are fitted for easy movement.   Doors : We use double door mechanism with inner door for observation which is fixed directly to the inner chamber that give you access to view plants inside without any variation in internal atmosphere. The exterior door is insulated and fixed with easy to use latches.   Temperature & Humidity: The temperature range is 5°C to 60°C and humidity range is 50% to 90%. These parameters are controlled through PID controller with excellent accuracy and uniformity through PT100 temperature and capacitive humidity sensors. High Quality heaters are used for temperature. For humidity, stainless steel tank with immersion heater is used with automatic water filling facility.   Illumination : Illumination plays important role in effective plant growth condition; therefore, we use high quality growth lights at three sides of the chamber. These lights are controlled through cyclic timer for 24X7 a week. These lights can be easily changed or replaced at user level.   Optional : We also equip our plant growth chambers with some advance features such as PLC based HMI controller. It features color touch screen having display and control of temperature and humidity with data monitoring and storage and also facility USB interface to transfer data into pen drive. 30mm port hole for external wires and validation are also available.   Features & Advantages Accuracy of temperature, humidity & light Made according to plant height Digital control panel Digital light timer Height adjustable shelves Durable construction   Optional Exterior made of stainless steel 304 / 316 White painted steel inner walls Door open alarm Plant growth racks UV lamp PLC with HMI interface Data logger with USB interface Password protection for controller Caster wheels Vertical Autoclave https://www.igenelabserve.in/vertical-autoclave.htm https://www.igenelabserve.in/vertical-autoclave.htm Thu, 20 May 2021 00:00:00 +0530 Vertical autoclaves are also known as top loading sterilizers that come in cylindrical shape. These are widely used in hospitals, Operation (OT), microbiology laboratory for sterilization of various medial and cultures. The working of vertical autoclave is simple to understand; to open, a radial locking mechanism is fitted at top of the lid; a foot lever (pedal) is attached at the bottom. Use lid.   We make various types of vertical autoclave machines Economy models come with powder coated MS exterior and stainless steel interior. Our Deluxe models are double walled vertical autoclaves and made with inner and exterior both of stainless steel; while the Triple Walled models have another chamber and all three walls are made of thick gauge of stainless steel sheets. sterilizer following ASME guidelines in order to ensure that they are safe for users and samples.   Features & Benefits Stainless steel interior Digital temperature indicator Digital temperature Controller ISI marked flange / immersion heating elements Up to 121°C temperature range Silicone rubber gasket Automatic pressure control switch Stainless steel basket Reliable steam pressure gauges Double or triple walled construction Pedal for lid opening Water level indicator Water inlet & outlet valves Vertical Electrophoresis https://www.igenelabserve.in/vertical-electrophoresis.htm https://www.igenelabserve.in/vertical-electrophoresis.htm Thu, 20 May 2021 00:00:00 +0530 IG-VDN Series vertical electrophoresis is having options to select from 1 to 4 gel with multiple comb options. VDN series protein electrophoresis are single molded units and does not have any fabrication or pasting to avoid leakage. Uniquely designed caster assembly is very easy to operate and are leakage free. It has been designed for ease of operation in such a way that casting and running is performed in same module to avoid accidental mishandling risk of transferring gels.   Features High resolution separation with simple operation. Uniquely designed glass plates to reduce risk of breakage. Option to select from 1-4 gels running capacity. High Strength polycarbonate material for durability at high current supply also. Casting and running in the same module to reduce risk of gel breakage in process. Auto cut on opening of lid for user safety. Multiple options of combs with thickness of 1.0 & 1.5mm. Inbuilt spacer in plates for easy casting to avoid leakage. Molded buffer tank equipped with pure platinum electrode.   Western Blot Unit High quality acrylic with platinum electrode Compatible with tank of 4 gel assembly. Fast transferring speed with good effect. Latches on the gel holder cassette for easy handling Two transfer can be performed at a time Vortex Mixer https://www.igenelabserve.in/vortex-mixer.htm https://www.igenelabserve.in/vortex-mixer.htm Thu, 20 May 2021 00:00:00 +0530 Standard Features : Variable speed selection -delivers upto2500 RPM 3 way switch (Touch, Continuous & Stand Brushless DC motor fitted with ball bearing Orbital diameter of 4 mm Visual indication marker for max speed with attachment IP 21 class protection - suitable for use in hoods Serological Water Bath https://www.igenelabserve.in/serological-water-bath.htm https://www.igenelabserve.in/serological-water-bath.htm Mon, 31 May 2021 00:00:00 +0530 Standard Features : Fitted with digital temperature controller Excellent temperature accuracy & uniformity High grade stainless steel interior Powder coated exterior cabinet Durable walled rugged construction High density glass wool insulation Variety of optional accessories available Digital Water Bath Shaker https://www.igenelabserve.in/digital-water-bath-shaker.htm https://www.igenelabserve.in/digital-water-bath-shaker.htm Thu, 20 May 2021 00:00:00 +0530 One of the essential equipment of laboratory used to incubate samples under water at constant temperature (hot or cold). The Water bath constant temperature shaker is widely used in experiments of pharmacy, such as germ culture, bioprocess technology, hybridization, biochemical reaction, enzyme and cellular tissue research. It has a wide and important range of applications in research of medicine, biology, diagnostic, pharmacy and environmental research   Standard Features Reciprocating type shaking motion Fitted with digital temperature controller Excellent temperature accuracy & uniformity High grade stainless steel interior Powder coated exterior cabinet OR epoxy coated SS304 High Density Glass wool Insulation Reciprocating motion with heavy duty powerful motor SS304 Spring type platform to accommodate multiple type of vessels Gable type SS304 Lid Drain system to easily replace water Low Noise and vibration Biosafety Cabinet https://www.igenelabserve.in/biosafety-cabinet.htm https://www.igenelabserve.in/biosafety-cabinet.htm Thu, 20 May 2021 00:00:00 +0530 Laboratory Chamber https://www.igenelabserve.in/laboratory-chamber.htm https://www.igenelabserve.in/laboratory-chamber.htm Thu, 20 May 2021 00:00:00 +0530 Laboratory Incubator https://www.igenelabserve.in/laboratory-incubator.htm https://www.igenelabserve.in/laboratory-incubator.htm Thu, 20 May 2021 00:00:00 +0530 Laboratory Freezer https://www.igenelabserve.in/laboratory-freezer.htm https://www.igenelabserve.in/laboratory-freezer.htm Thu, 20 May 2021 00:00:00 +0530 Laboratory Centrifuge https://www.igenelabserve.in/laboratory-centrifuge.htm https://www.igenelabserve.in/laboratory-centrifuge.htm Thu, 20 May 2021 00:00:00 +0530